Removing the fan assembly
The fan assembly is secured with four screws and has one cable.
To remove the fan:
1. Prepare the computer for disassembly (Preparation for disassembly on page 19).
2. Remove the computer head unit from the stand (Removing and attaching the Engage One head unit to
the stand on page 27).
3. Remove the display panel from the computer head unit (Removing the display panel on page 41)
4. Disconnect the fan cable from the system board (1), and then remove the tape that secures the cable to
the system board (2).
5. Loosen the four captive Phillips screws (3) that secure the fan assembly to the computer head unit.
6. Remove the fan assembly from the computer head unit (4).
To reinstall the fan assembly, reverse the removal procedure.
52 Chapter 4 Removal and replacement procedures
To Next Page
Loading...
