HP ENVY 13 - Power Management; Using Power-Saving States

Display assembly
Description Spare part number
In natural silver nish:
UHD, WLED, BrightView (3840×2160), uslim-at (2.0-mm), UWVA, eDP1.3+PSR, narrow bezel (DBTS),
TouchScreen display assembly (340 nits, 72% color gamut)
928479-001
FHD, WLED, BrightView (1920×1080), uslim-at (2.4-mm), UWVA, eDP1.3+PSR, narrow bezel (DBTS),
TouchScreen display assembly (300 nits, 72% color gamut)
928478-001
UHD, WLED, BrightView (3840×2160), uslim-at (2.0-mm), UWVA, eDP1.3+PSR, narrow bezel, non-
TouchScreen display assembly (340 nits, 72% color gamut)
928483-001
UHD, WLED, BrightView (3840×2160), uslim-at (2.0-mm), UWVA, eDP1.3+PSR, narrow bezel (DBCG),
non-TouchScreen, ush glass display assembly (340 nits, 72% color gamut)
928475-001
FHD, WLED, BrightView (1920×1080), uslim-at (2.4-mm), UWVA, eDP1.3+PSR, narrow bezel, non-
TouchScreen display assembly (300 nits, 72% color gamut)
928482-001
FHD, WLED, BrightView (1920×1080), uslim-at (2.4-mm), UWVA, eDP1.3+PSR, narrow bezel (DBCG),
non-TouchScreen display assembly (300 nits, 72% color gamut)
928474-001
In silk gold nish:
FHD, WLED, BrightView (1920×1080), uslim-at (2.4-mm), UWVA, eDP1.3+PSR, narrow bezel (DBTS),
TouchScreen display assembly (300 nits, 72% color gamut)
928476-001
UHD, WLED, BrightView (3840×2160), uslim-at (2.0-mm), UWVA, eDP1.3+PSR, narrow bezel (DBTS),
TouchScreen display assembly (340 nits, 72% color gamut)
928477-001
UHD, WLED, BrightView (3840×2160), uslim-at (2.0-mm), UWVA, eDP1.3+PSR, narrow bezel, non-
TouchScreen display assembly (340 nits, 72% color gamut)
928481-001
UHD, WLED, BrightView (3840×2160), uslim-at (2.0-mm), UWVA, eDP1.3+PSR, narrow bezel (DBCG),
non-TouchScreen, ush glass display assembly (340 nits, 72% color gamut)
928473-001
FHD, WLED, BrightView (3840×2160), uslim-at (2.0-mm), UWVA, eDP1.3+PSR, narrow bezel, non-
TouchScreen display assembly (340 nits, 72% color gamut)
928480-001
FHD, WLED, BrightView (3840×2160), uslim-at (2.0-mm), UWVA, eDP1.3+PSR, narrow bezel (DBCG),
non-TouchScreen, ush glass display assembly (340 nits, 72% color gamut)
928472-001
Before removing the display assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is o or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by rst unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
4. Remove the bottom cover (see Bottom cover on page 30).
5. Disconnect the battery cable from the system board (see Battery on page 33).
Remove the display assembly:
1. Release the ZIF connector (1) to which webcam/microphone module cable is connected, and then
disconnect the webcam/microphone module from the system board.
2. Release the piece of tape (2) that secures the webcam/microphone module cable to the system board.
Component replacement procedures 41