HP ENVY m6 - Heat Sink and Processor Replacement

a. Remove the four Phillips PM2.0×2.9 screws (1) that secure the display panel to the
display enclosure.
b. Lift the display panel (2) straight up and remove it from the display enclosure.
The display panel is available using spare part numbers 720557-001 (15.6-in, BrightView, FHD,
LED, non-TouchScreen display panel) and 720556-001 (15.6-in, BrightView, HD, LED, non-
TouchScreen display panel).
13. If it is necessary to replace the display panel cable:
CAUTION: Before turning the display panel upside down, make sure the work surface is clear of tools,
screws, and any other foreign objects. Failure to follow this caution can result in damage to the display
panel.
a. Turn the display panel upside down with the bottom edge toward you.
52 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts