d. Remove the hinges (3).
The display hinges are available using spare part number L94499-001.
16. If it is necessary to replace the display hinge covers, follow these steps:
a. Remove the display panel assembly.
b. Remove the display hinges.
c. Remove the two Phillips M2.0×4.1 screws (1) that secure the display hinge covers to
the display hinges.
d. Remove the display hinge covers (2).
The display hinge covers are available using spare part number L94504-001.
17. If it is necessary to replace the WLAN antenna(s), follow these steps:
50 Chapter 5 Removal and replacement procedures
To Next Page
Loading...
