HP F300 - 2.2 Installing in Vehicles; 2.2.1 Mount to Windshield

9
2.2 Installing in Vehicles
2.2.1 Mount to Windshield
1. Attach the bracket to the device.
Sli
de it into the bracket holder until
you
hear a c
lick.
2. With the su
ction-c
up laying flat,
position the suc
t
ion-cup on the
wind
shield.
3. Hold th
e base firmly on the windshield and press down
the
clamp to mount t
he car holder to the windshield. Make
sure the
base is securely lo
cked in
place.
Warning: Do not i
nstall the device on a tinted window. Doing so may
damage the tint film.