HP F300 - 2.5 Initial Settings; 2.5.1 Set Automatic Recording; 2.5.2 Set the Date and Time

13
2.5 Initial Settings
Before using the device, we recommend you enable the Automatic
Record function and set up the correct date and time.
2.5.1 Set Automatic Recording
To enable the recording to start automatically after you turn on the
power, do the following:
1. Press the
button to enter the OSD menu.
2. Press the
/ button to select
Automatic Record and press the
but
t
on.
3.
Press the
/ button to select On
and press the
button.
4. Press the
button to exit the menu.
2.5.2 Set the Date and Time
To set the correct date and time, do the following:
1. Press the
button to enter the OSD menu.
2. Press the
/ button to select Date / Time and press the
but
t
on.
3.
Press the
/ button to adjust the
value and
press the
button to
mov
e to another field.
4. Repea
t step 3 until the date and time
setting is complete
.
Note:
When the battery is drained dry , the user must reset the date/time before the funciotn - automatic
record is started. The device will still start to record after one minute if the user does not reset
the date/time, but the video will not have date / time.