28
3.6 Collision Detection
If the Collision Detection function is enabled, this camcorder begins
emergency recording once it detects any collision. Sensitivity of the
Collision Detection function is set to Normal by default, if user wants to
change the settings of Collision Detection, do the following:
1. Press the button to enter the OSD menu.
2. Press the / button to select Collision Detection, and
then press the
OK
button for entering function menu.
3. Press the / button to change the sensitivity of this
camcorder’s collision detection (High Sensitivity / Normal
Sensitivity / Low Sensitivity / Off), and then press the
OK
button for entering function menu.
4. Press the button return to recording screen.
3.7 HUD
The HUD function can check car speed at the moment and date/time. The
HUD mode won’t disturb the recording, nor the speed cam alert. There
are two ways to enter HUD mode.
1. Manually
In the preview screen, press Power button to enter. Press again
Power button to exit and back to preview screen.
2. Automatically
Turn on “HUD” function from “LCD Setting”. Next time when the car
starts, the camcorder starts up, about 7 seconds it will auto enter HUD
mode if there is no operation on the camcorder. When HUD mode is on
screen, anytime press Power button to back preview screen. If there
is no operation in 7 seconds, it will enter HUD mode again.
To Next Page
Loading...
