HP F920x - Setting the Date and Time

15
2.6.2 Set the Date / Time
To set the correct date and time, do
the following:
1. Press the button to enter
the OSD menu.
2. Press the / button to
select Date / Time, and then
press the button for
entering function menu.
3. Press the / button to adjust the value, and then press the
button to set the next field.
4. Repeat step 3 until the date and time setting is completed.
Note:
To ensure the accuracy of the video file time, please reset the date and time when not in use over 7
days.