41
Set LCD off time. Camcorder
screen will be off after a set
time if no operation is
detected during the standby
or record mode. Press any
button will switch it on.
(Recording is not affected
when screen is off).
On/ Turn off after 7 sec /
Turn off after 1min/ Turn off
after 3min
Setting for activating audio in
the video.
Enable / disable power-on
sound and key tone.
Press the / button to
set the volume. It can be set
between 0 ~ 10.
Save respective video files in
a length of the selected
duration.
30 sec. / 1 min. / 3 min.
If one of parking mode is
activated, the camcorder will
enter parking mode 10
seconds after disconnect the
external power.
Off/ Park Recording / Motion
and Collision Detection /
Timelapse
If Collision Detection is
activated, this camcorder
starts emergency recording
once it detects any collision.
High Sensitivity / Normal
Sensitivity / Low Sensitivity /
Off
When Driver Fatigue Alert is
enabled, audible alert and
screen message will be
activated 1 hour after the
camcorder is powered on,
with a repetition every 30
minutes.