Setup Utility 5–3
Setup Utility menus
The menu tables in this section provide an overview of Setup Utility options.
✎
Some of the Setup Utility menu items listed in this chapter may not be supported by your computer.
Main menu
Security menu
System Configuration menu
Select To Do This
System information ■ View and change the system time and date.
■ View identification information about the computer.
■ View specification information about the processor, memory size, system
BIOS, and keyboard controller version (select models only).
Select To Do This
Administrator password Enter, change, or delete an administrator password.
Power-On Password Enter, change, or delete a power-on password.
Select To Do This
Language Support Change the Setup Utility language.
Boot Options Set the following boot options:
■ f10 and f12 Delay (sec.)—Set the delay for the f10 and f12 functions of the
Setup Utility in intervals of 5 seconds each (0, 5, 10, 15, 20).
■ CD-ROM boot—Enable/disable boot from CD-ROM.
■ Floppy boot—Enable/disable boot from Floppy.
■ Internal Network Adapter boot—Enable/disable boot from Internal
Network Adapter.
■ Boot Order—Set the boot order for:
❐ USB Floppy
❐ ATAPI CD-/DVD-ROM Drive
❐ Hard drive
❐ USB Diskette on Key
❐ USB Hard drive
❐ Network adapter
Button Sound (select models only) Enable/disable the Quick Launch Button tapping sound.
Virtualization Technology Enable/disable the processor Virtualization Technology.
Processor C4 State Enable/disable the processor C4 sleep state.
To Next Page
Loading...
Need help?
General