HP HPE XP P9500 User Manual

System specifications and requirements
This section describes the physical characteristics of a P9500 disk array, including
• “Mechanical specifications” (page 20)
• “Electrical specifications” (page 22)
• “Environmental specifications” (page 26)
Mechanical specifications
The following table lists the mechanical specifications of the P9500 disk array.
Table 9 P9500 mechanical specifications
Six RacksFive RacksFour RacksThree RacksTwo RacksOne RackDimension
142 inches118.5 inches95 inches71.3 inches47.6 inches24.0 inchesWidth
(3610 mm)(3010 mm)(2410 mm)(1810 mm)(1210 mm)(610 mm)(includes 1 set of
side panels)
45 inches45 inches45 inches45 inches45 inches45 inchesDepth
(1145 mm)(1145 mm)(1145 mm)(1145 mm)(1145 mm)(1145 mm)(including doors)
79 inches79 inches79 inches79 inches79 inches79 inchesHeight
(2006 mm)(2006 mm)(2006 mm)(2006 mm)(2006 mm)(2006 mm)(including casters)
The following illustration shows an overview of a P9500 disk array.
20 Installation requirements

HP HPE XP P9500 Specifications

General

Brand	HP
Model	HPE XP P9500
Category	Disk array system
Language	English