HP HPE XP P9500 User Manual

A Technical Specifications
Mechanical specifications
The following table lists the mechanical specifications of the P9500 disk array.
Table 31 P9500 mechanical specifications
Dual ModuleSingle ModuleSingle RackDimension
(6 racks)(3 racks)
142 / 361071.3 / 181024.0 / 610Width (inches / mm)
45 / 114545 / 114545 / 1145Depth (inches / mm)
79 / 200679 / 200679 / 2006Height (inches / mm)
7500 / 34023750 / 17011120 / 508 (Diskless)Min (lbs / kg)System
Weight
8560 / 38834319 / 19591558 / 707Max (lbs / kg)
Rack Weight is included in system weight292.6 / 133(lbs / kg)Rack
Weight
Electrical specifications
The P9500 supports single-phase and three-phase power. Power consumption and heat
dissipation is independent of input power.
“System heat and power specifications” (page 55) lists system heat and power specifications.
“System components heat and power specifications ” (page 56) lists component heat and power
specifications.
“AC power - PDU options” (page 57) lists the PDU specifications for both single phase and three
phase power.
System heat and power specifications
Table 32 System heat and power specifications
Full Array
(DKC-0 plus
DKU RackDKC Module-1DKC Module-0
Parameter
1, 2
DKC-1 plus DKU
x4)
33.15.455.425.87Max Power
consumption
(kVA)
Heat Dissipation
and Power
Consumption
Specifications
31.45.175.155.57Max Heat
dissipation (kW)
(Maximum
configuration)
107155176431757119012Max BTUs per
hour
27002444644284791Max Kcal per hour
1
Heat (KW, BTU, Kcal) and Power (kVA) values are for determining load for site planning. Actual heat generation
and power demand may be less.
2
Calculated values with drives at a typical I/O condition. (Random Read and Write, 50 IOPSs for HDD, 2500 IOPSs
for SSD, Data Length: 8Kbytes). These values may increase for future compatible drives.
Mechanical specifications 55

HP HPE XP P9500 Specifications

General

Brand	HP
Model	HPE XP P9500
Category	Disk array system
Language	English