Table 29 P9500 AC PDU options (continued)
Notes
Facility
receptacle
neededPlug Type
Branch circuit
requirements
per PDU
Number of
PDU per
Rack
1
Local Power
Product
Number
IEC60309 32A
plug
Notes:
1. Each PDU has one fixed power cord with attached plug. Power cord is not removable.
NOTE: PDU models can be changed in the field using offline maintenance procedures.
NOTE: When ordering systems, Hewlett Packard Enterprise does not allow mixtures of different
phase PDUs in a system (even though there are no technical issues). Only upgrade orders can
ship with difference phase PDUs in a system.
Figure 17 P9500 AC power configuration diagram
*1 (left): When connected correctly, one of the two PDUs can supply power to the DKC-DKU
rack.
*1 (right): When connected correctly, one of the four PDUs can supply power to the DKC-DKU
rack.
Environmental specifications
The following table lists the environmental specifications of the P9500 storage system.
Table 30 P9500 environmental specifications
In StorageNot OperatingOperatingItem
-45 - 140-18 - 109.4 / -10 to 4360.8 - 80.9 /Temperature
-25 to 60-18 to 95 / -10 to 35
8
16 to 32(ºF / ºC)
5 to 958 to 9020 to 80Relative Humidity
(%)
2
Environmental specifications 53
To Next Page
Loading...
