HP Indigo S2000 User Manual

proprietary and confidential page 1 of 3
HP Indigo Division Technical Note
Proprietary and Confidential
TN Number: 601 Date: 25 June 02 Author: Meir Kormian
System:
hp indigo press s2000
______________________________________________________________________
Subject: hp indigo press s2000 release
______________________________________________________________________
1. Purpose
This Technical Note announces the release of the hp indigo press s2000
and details the difference between Omnius MultiStream and s2000.
2. Background
The hp indigo press s2000 includes the following new features:
• Image Tracking Technology (ITT):
Image Tracking Technology is a new laser head writing capability that
allows the imaging lasers to precisely lock onto the surface motion of the
Photo Imaging Plate (PIP). Using a new encoder, the PIP is constantly
monitored to provide closed loop control of the writing head imaging.
• Baldor with RS232 interface (P/N EAS-1109-51):
Baldor motor control unit with RS232 interface to support vertical
scaling procedure, the Baldor parameters are different from MultiStream
and hp indigo press 1000 . Refer to the attached document to view the
new Baldor parameters. The RS232 cable is connected to W430 cable
(P/N EHE-1430-51), the other side of W430 cable is connected to:
For hp PCs: J9 on the EPU.
For Motorola PCs: J8 on the UCB.
The Baldor has a new configuration:
SystabEditor>engineConfigTopic>baldorlftype>select: HT_VER2

HP Indigo S2000 Specifications

General

Brand	HP
Model	Indigo S2000
Category	Power Tool
Language	English

Summary

HP Indigo Press s2000 Features and Notes

Image Tracking Technology (ITT)

Laser head writing capability for precise locking onto Photo Imaging Plate motion.

Baldor Motor Control Unit

RS232 interface for vertical scaling, with specific parameter differences.

Vacuum Pump Motor and Pulley Upgrades

1 HP motor and 60Hz compatible pulley to prevent overheating.

Press Installation and Configuration Notes

Important notes for pulley installation, monitor setup, and system configurations.

60Hz Pulley Replacement Procedure

Purpose and Prerequisites for Pulley Replacement

To install a 60Hz compatible pulley and prepare the press.

Installation Steps: Disassembly and Removal

Steps to disassemble the press and remove the old vacuum pump pulley.

Installation Steps: New Pulley Fitting

Instructions for cleaning, fitting, aligning, and securing the new pulley.

Testing and Final Assembly

Procedure for testing the new pulley and completing reassembly.

HP Indigo Wiring Diagrams

Wiring Diagram Overview and Contents

Index of sheets and components covered in the Platinum wiring diagrams.