HP Integrity rx2600 - Page 12

1–4 HP Integrity rx2600 server and HP workstation zx6000 Operation and Maintenance Guide
Product Overview
Accessory card slots zx6000 workstation:
• One AGP Pro 4
×
32-bit slot supporting 1.5V AGP cards
• Three 64-bit 133 MHz Peripheral Component Interconnect
(PCI-X 1.0) slots, supporting all bridges and multifunction PCI-X
devices; all three PCI-X slots comply with PCI-X 1.0 specification
Integrity rx2600 server:
• Four 64-bit 133 MHz Peripheral Component Interconnect (PCI-X 1.0)
slots
Management Processor
card
(standard on Integrity
rx2600 server, optional
on zx6000 workstation)
25-pin serial connector (with console/remote/USP extensions; requires
breakout cable)
10/100 BT Management LAN
15-pin VGA connector
• The graphics display port functionality on the HP Management
Processor Card is not supported on zx6000 workstations with an
AGP graphics card installed; all other HP Management Processor
Card functionality is supported
Rear connectors
(labeled)
Four USB connectors:
• High speed 480 Mb/sec. capable
• Full speed 12 Mb/sec. and low speed 1.5 Mb/sec.
• HP-UX supports HP USB keyboard and mouse
• Linux supports all 1.1 USB devices
• Windows supports USB keyboard and mouse,
as well as other USB devices with driver support
Two 9-pin serial ports:
•UART 16550 buffered
• RS-232-C
External 68-pin LVDS/SE SCSI connector (see SCSI controller above)
LAN connectors • 10/100 BT Management LAN
• 10/100/1000 BT Gigabit LAN
• 10/100 BT MP Card LAN (on systems with MP card)
Feature Description