A Partition commands
This appendix contains a summary of the Partition commands and descriptions of their use.
Table 13 Partition Commands Descriptions
DescriptionCommand
Creates a new nPartition.parcreate
Displays or changes default values of certain nPartition attributes.pardefault
Modifies an existing nPartition.parmodify
Configure partition configuration privilege for nPartitions and vPars.parperm
NOTE: This command is available only from the OA.
Removes an existing nPartition.parremove
Displays nPartition information and hardware details for a server complex.parstatus
Creates a new Virtual Partition.vparcreate
Boots a Virtual Partition.vparboot
Renames or modifies the resources of a Virtual Partition.vparmodify
Resets a Virtual Partition.vparreset
Removes an existing Virtual Partition.vparremove
Displays information about one or more Virtual Partitions.vparstatus
For more information on the Partition commands, see http://www.hp.com/go/
hpux-clickable-manpages.
107
To Next Page
Loading...
