HP Integrity Superdome 2 16-socket - Complex Management Commands; Clear NTP; Disable NTP; Enable NTP

Figure 39 Booting vPar from the GUI
Getting the vPar Console
You can use either the command line or the GUI to access the system console of the virtual partition.
From the CLI
Use the co command with or without the partition ID.
Example 5 Example
co
Partition Partition
Number Name
--------- ---------
1 nPar0001
2 nPar0002
2:1 nPar0002:vPar0001
Q) Quit
Select partition number: 2:1
----Log Snippet---------
----Log Snippet---------
Welcome to the Superdome 2 console
<use <Ctrl-b> to exit.>
Shell>
From the GUI
On the OA GUI, click the Remote Console tab to access the system console of the virtual partition
from the details page of each partition.
92 Managing and Booting Virtual Partitions