Figure 33 TOC nPartition
Figure 34 TOC vPar
UPDATE NPARTITION
IMPORTANT: This command is not available if you are using complex firmware that is earlier
than the Online Firmware Update release.
To update firmware for all partitions, see “UPDATE FIRMWARE” (page 72).
• Command:
UPDATE NPARTITION [ALL|<nPar name or number>|BLADE
<blade_resource_path>] <uri> [FORCE] [REINSTALL] [NOEXECUTE]
• Description:
The UPDATE NPARTITION command downloads a new flash image from the network
or a USB drive attached to the DVD module, or a DVD in the enclosure DVD drive in the
◦
70 Booting and resetting Partitions (nPartitions and vPars)
To Next Page
Loading...
