parstatus -P
[Partition]
Par State/ Status* # of # of ILM/ Partition Name
Num RunState Blades IOBays SLM (first 15
(GB)** characters)
=== ======================= ======= ====== ====== ============= ===============
1 Active /EFI OK 1 1 14.0/112.0 nPar0001
2 Inactive /DOWN OK 1 1 16.0/112.0 nPar0002
3 Active /RUN_VPARS OK 1 1 126.0/0.0 nPar0003
* D-Degraded
** Actual allocated for Active and User requested for Inactive partitions
nl
nl
To list all the nPartitions and their boot states in the OA GUI, use the Complex nPartition Summary
page.
Figure 2 nPartition Summary Information
RunStates
The partition runstates displayed by the status commands and GUI display the actual state of the
partition varying from a firmware boot state to a state where an operating system has successfully
booted in a partition. Table 3 (page 28) lists the runstates for an nPartition.
Partition State and RunStates 27
To Next Page
Loading...
