Removing Assemblies 6-25
Main Motor
Figure 6-22 Removing the Main Motor
1 Remove the Top Cover (page 6-7) and the Front Right Side Cover
(page 6-13). The Main Motor is on the right front side of the
printer.
2 Unplug the connector.
3 Remove the 4 silver screws around the corners of the metal plate.
4 Remove the Main Motor from the printer.
For more information on the LaserJet 4000 / 4050 Visit www.PrinterSupplies.com 800-551-1943
To Next Page
Loading...