6-50 Removing and Replacing Parts
Paper Feed Module Plate
Remove the Paper Feed Module Plate to access the Controller PCA.
This procedure is the same for one 500-sheet Tray or two 250-sheet
Trays.
Figure 6-47 Removing the Paper Feed Module Plate
1 Remove the 7 black self-tapping screws (one of them is recessed
in front).
2 Remove 2 small metal-to-metal screws.
3 Lift up the Paper Feed Module Plate to remove it.
(Small)
For more information on the LaserJet 4000 / 4050 Visit www.PrinterSupplies.com 800-551-1943
To Next Page
Loading...