6-34 Removing and Replacing Parts
Registration Assembly
Figure 6-31 Removing the Registration Assembly
1 Remove the following covers (starting on page 6-6): Top Cover,
Left Side Cover, Front Right Side Cover, and Tray 1. Remove the
Tray 1 pickup assembly (page 6-29). The Right Side Toner
Cartridge Guide can be lifted without removal (page 6-33). The
Registration Assembly is under the Toner Cartridge.
2 Remove the 3 black self-tapping screws shown. (Lift the green
handle on the right end of the Registration Assembly to access
the black screw on the left rear side.)
For more information on the LaserJet 4000 / 4050 Visit www.PrinterSupplies.com 800-551-1943
To Next Page
Loading...