6-48 Removing and Replacing Parts
Paper Feed Rollers
The following procedure is the same for all HP LaserJet 4000 and
4050 series printers; there are 2 Feed Rollers for the HP LaserJet
4000 T/4000 TN and 4050 T/4050 TN and one Feed Roller for the
HP LaserJet 4000/4000 N and 4050/4050 N printers.
Figure 6-45 Removing the Paper Feed Rollers (HP LaserJet 4000 T/4000 TN and
4050 T/4050 TN shown)
1 Remove the tray(s) from the Feeder. The Paper Feed Rollers are
inside the Feeder.
2 Pinch the release at the left side of the Roller and slide it off the
shaft.
For more information on the LaserJet 4000 / 4050 Visit www.PrinterSupplies.com 800-551-1943
To Next Page
Loading...