Preventative Maintenance 4-5
Preventative Maintenance
The preventative maintenance cycle for this printer is every 200,000
pages. To order the maintenance kit see page 8-2. The kit contains
the following replacement parts:
●
One Fuser
●
One Transfer Roller
●
One Tray 1 Roller
●
Three Feed Rollers
●
Three Separation Rollers
Refer to the instructions included in the kit for detailed replacement
procedures.
Reset Maintenance Count
After the PM kit has been installed, reset the maintenance count.
1 Turn the printer off.
2 While pressing [– Item] and [– Value] turn the printer on.
RESET MAINTENANCE COUNT
appears, followed by
INITIALIZING
.
After a few seconds
READY
appears.
For more information on the LaserJet 4000 / 4050 Visit www.PrinterSupplies.com 800-551-1943
To Next Page
Loading...