Separating the Engine Module from the Paper Feed Module 6-51
Paper Feed Module Gear Train Assembly
This procedure is the same for one 500-sheet Tray or two 250-sheet
Trays.
Figure 6-48 Removing the Gear Train
1 Remove the long recessed screw shown.
2 Unplug the connector (note routing).
3 Lift the gear train upward, away from the Paper Feed Module.
Unplug
connector
For more information on the LaserJet 4000 / 4050 Visit www.PrinterSupplies.com 800-551-1943
To Next Page
Loading...