Removing Assemblies 6-31
Figure 6-28 Removing the Tray 1 Pickup Assembly – Left Side
6 Unplug the connector to the Engine Controller Board on the left
side of the Tray 1 Pickup Assembly.
7 Remove the long screw (4.8 in/116 mm) from the left side of the
assembly.
8 Remove the self-tapping screw shown.
Step 6
Step 7
Step 8
For more information on the LaserJet 4000 / 4050 Visit www.PrinterSupplies.com 800-551-1943
To Next Page
Loading...