Troubleshooting the Printing System 7-47
Paper Path Test
To perform a Paper Path Test:
1 Press [Menu] until
INFORMATION MENU
appears.
2 Press [Item] until
PRINT PAPER PATH TEST
appears.
3 Press [Select].
4 Press [+] to cycle selections until the desired paper tray appears.
5 Press [Select].
6 Press [+] until the desired output bin appears (open the Rear
Output Bin to print to it).
7 Press [Select].
8 Press [+] until the desired duplex mode (on or off) appears.
9 Press [Select].
10 Press [+] to cycle selections until the desired number of copies
appears. Choose 1, 10, 50, 100, or 500 copies.
11 Press [Select] to perform the Paper Path Test.
For more information on the LaserJet 4000 / 4050 Visit www.PrinterSupplies.com 800-551-1943
To Next Page
Loading...