7-60 Troubleshooting
Table 7-13. Blank Spots
Possible Cause Action
Paper does not meet
printer specifications
or is stored
improperly.
1. Print a few more pages to see if the problem
corrects itself.
2. Turn over the stack of paper in the tray. Also try
rotating the paper 180°.
3. Check the paper (or other print media) type and
quality. Replace the paper, and advise the customer
to use the recommended paper and store it properly.
Contaminated or
deformed Transfer
Roller.
Replace the Transfer Roller.
Defective Toner
Cartridge.
Replace the Toner Cartridge.
See also “Dropouts” on page 7-65.
For more information on the LaserJet 4000 / 4050 Visit www.PrinterSupplies.com 800-551-1943
To Next Page
Loading...