3-14 Printer Operation
TONER DENSITY=3 1
2
3
4
5
Lighten or darken the print on the
page by changing the Toner
density setting. The settings range
from 1 (light) to 5 (dark), but the
default setting of 3 usually
produces the best results.
Use a lower Toner density setting
to save Toner.
Note
It is best to change the Toner
density from the printer driver or
software application. (Driver and
software settings override Control
Panel settings.)
CREATE
CLEANING PAGE
No value to select. Press [Select] to print a cleaning
page (for cleaning excess Toner
from the Fuser assembly).
In order for the cleaning page to
work properly, print the page on
copier grade paper (not bond or
rough paper). Follow the
instructions on the cleaning page.
PROCESS
CLEANING PAGE
No value to select. This item appears only after a
cleaning page has been
generated (as described above).
Press [Select] to process the
cleaning page.
Table 3-8. Print Quality Menu (continued)
Item Values Explanation
For more information on the LaserJet 4000 / 4050 Visit www.PrinterSupplies.com 800-551-1943
To Next Page
Loading...