HP ML110 G1 - Collecting Configuration Information; Configuration Information

Collecting configuration information
Choose a host name and collect general information required to initialize
the storage server for either dynamic host configuration protocols
(DHCP) or non-DHCP configurations. This information is needed during
configuration, as shown in Table 5. Become familiar with this information
before attempting to configure the storage server .
Table 5 Configuration Information
Part A: To be completed for DHCP and non-DHCP configurations
Server Host Name:
Part B: To be completed for non-DHCP configurations only
DNS Servers IP Address
1
2
3
Storage Server NIC
Port* IP Address
Subnet
Mask
Gateway
Address
NIC 1
NIC 2
* Disable ports tha t will not be used. Each Ethernet port, whether standard
or added, must be configured with a separate subnet.
Part C: SNMP Information (optional)
Trap Destination (IP
Address) Manager
Client:
Management Traps
Communit y String:
System Management
Communit y String:
22
System Configuration