Figure 8 Disk mana gement, partitioning (ML110 G1 and
DL100)
Under normal circumstances, the ML110 G1 and DL100 storage server
boots up from the primary OS logical drive. If the system experiences a
drive failure, the Adaptec 2410SA sounds an audible alert to inform the
user of a drive failure.
• If a single drive failure occurs, it is transparent to the OS.
• Ifaseconddrivefails,thedatavolumeislostandmustberestored
from backup.
WhentheprimaryOShasafailuresuchassystemfiles becoming
corrupted, registry corrupted, and the system hangs during boot, the
system should be run from the secondary OS. To run the system from the
secondary OS:
1. Power down the unit.
2. Connect a monitor, keyboard, and mouse directly to the rear of the
unit.
3. Power on the unit.
4. During boot up, sel ect to use the secondary partition.
TheusershouldbackuptheiruserdataandthenusetheQuickRestoreDVD
to restore the system to the factory default state as soon as conveniently
possible.
HPProLiantStorageServeruserguide
45
To Next Page
Loading...
