HP ML110 G1 - Storage for 300 Series and 500 Series Proliant Storage; Physical Drive Configuration; Hard Drive Configuration

Storage for 300 series and 500 series ProLiant storage
servers
The 300 series and 500 series storage servers ship pre-configured for
the Operating System only. Additional storage con figuration is needed.
Depending on the type of storage server, storage configuration can involve
local storage configuration via the HP Array Configuration Utility, Adaptec
Storage Manager, or SAN management tools.
Physical drive configuration
Each 300 series and 500 series storage server comes with two
hot-pluggable hard drives for the Operating System only. The drives are
configured by default into two logical disks at the controller level as follows:
Ta ble 16 Hard drive configuration
Logical Disk
RAID
Size/Allocation
1
RAID 1
27 GB across physical drive 0, 1
2
RAID 1
7GBacrossphysicaldrive0,1
HPProLiantStorageServeruserguide
53