HP ML110 - ProLiant G5 2TB Storage Server NAS - HP Proliant RAID Configurations; Physical Configuration

Physical configuration
The logical disks reside on physical drives as shown in “HP ProLiant RAID configurations” on page 21.
The DON'T ERASE volume contains an image that is deployed onto the OS partition during system
installation.
Table 4 HP ProLiant RAID configurations
Logical Disk 3 — nLogical Disk 2Logical Disk 1Server model
N/A
ML110 G5 (2
HDD 320 GB
SATA)
•
•
Data Volume
Operating System
Volume
• RAID 1
• RAID 1
• Physical Drives 1–2
• Physical Drives 1–2
• Data Volume• DON'T ERASE Volume
• Operating System
Volume
• ML110 G5
(4 HDD)
• RAID 5• RAID 5
• RAID 5
• DL160 G5
• Physical Drives 1–4• Physical Drives 1–4
• Physical Drives 1–4
N/ADL380 G5
• DON'T ERASE Volume
• Operating System
Volume
• RAID 1+0
• RAID 1+0
• Physical Drives 1–2
• Physical Drives 1–2
ML350 G5
• Data Volume• DON'T ERASE Volume
• Operating System
Volume
• RAID 5• RAID 5
• RAID 5
• Physical Drives 1–6• Physical Drives 1–6
• Physical Drives 1–6
DL380 G5 1.16
TB SAS
• Data Volume• DON'T ERASE Volume
• Operating System
Volume
• RAID 5• RAID 5
• RAID 5
• Physical Drives 1–8• Physical Drives 1–8
• Physical Drives 1–8
N/ADL585 G2
• DON'T ERASE Volume
•
Operating System
Volume
• RAID 1+0
• RAID 1+0
• Physical Drives 1–2
• Physical Drives 1–2
NOTE:
The HDDs included with the ML110 G5 2 HDD 320 GB SATA storage server are configured for software
RAID fault tolerance using the motherboard SATA controllers. In the event of a hard disk failure, user
intervention is required to rebuild the arrays. Microsoft Disk Manager is used to present the HDDs to the
system as dynamic disks. The primary OS logical drive resides on physical disk 1 and is mirrored on
physical disk 2. The data volume is the second logical drive mirroring the remaining space on disk 1 with
disk 2.
HP ProLiant Storage Server 21