HP MP9 G2 Retail System User Manual

Front bezel
The front bezel is secured to the top cover by tabs.
1. Prepare the computer for disassembly (Preparation for disassembly on page 20).
2. Remove the top cover (Top cover on page 21).
3. Position the top cover upside-down so you can access the inside of the bezel.
4. Pull down to loose the bottom, interior on the bezel (1).
5. Disengage the tabs on the top, interior of the bezel (2).
6. Remove the bezel from the top cover.
To install the front bezel, reverse the removal procedure.
22 Chapter 4 Removal and replacement procedures – desktop mini (DM) chassis

HP MP9 G2 Retail System Specifications

General

Brand	HP
Model	MP9 G2 Retail System
Category	Desktop
Language	English