HP NonStop SSL User Manual

HP NonStop SSL Reference Manual Configuration • 79
• If running in IPMODE DUAL the TARGETSUBNET must support both IPv4 and IPv6 (even for IPv4
connections).
TCPIPHOSTFILE
Use this parameter to specify the value of the DEFINE=TCPIP^HOST^FILE value.
Parameter Syntax
TCPIPHOSTFILE hostfile | *
Arguments
hostfile
a hostfile to be used for DNS name resolution. The hostfile will override the value of the DEFINE
=TCPIP^HOST^FILE, which may have been passed to HP NonStop SSL at startup.
*
No hostfile will be set. However, any DEFINE =TCPIP^HOST^FILE passed to HP NonStop SSL at startup will
remain in effect.
Default
The default for this parameter is *.
Considerations
• See the HP NonStop manual for details of the usage of the DEFINE =TCPIP^HOST^FILE.
TCPIPNODEFILE
Use this parameter to specify the value of the DEFINE=TCPIP^NODE^FILE value.
Parameter Syntax
TCPIPNODEFILE nodefile | *
Arguments
nodefile
a node file to be used for DNS name resolution. The node file will override the value of the DEFINE
=TCPIP^NODE^FILE, which may have been passed to HP NonStop SSL at startup.
*
No node file will be set. However, any DEFINE =TCPIP^NODE^FILE passed to HP NonStop SSL at startup will
remain in effect.
Default
The default for this parameter is *.
Considerations
• See the HP NonStop manual for details of the usage of the DEFINE =TCPIP^NODE^FILE.
TCPIPRESOLVERNAME
Use this parameter to specify the value of the DEFINE =TCPIP^RESOLVER^NAME value.
Parameter Syntax

HP NonStop SSL Specifications

General

Brand	HP
Model	NonStop SSL
Category	Software
Language	English