To Next Page

To Previous Page

5–42 Maintenance and Service Guide

Removal and Replacement Procedures

5. Turn the computer display-side up with front toward you.

6. Open the computer as far as possible.

7. Disconnect the LED board cable 1 from the system board.

8. Insert a flat-bladed screwdriver into the four notches 2 on the

front edge of the switch cover 3 and lift up until the cover

disengages from the computer.

9. Remove the switch cover.

Removing the Switch Cover

Reverse the above procedure to install the switch cover.

Questions and Answers:

Need help?

Do you have a question about the HP nx6310 - Notebook PC and is the answer not in the manual?

HP nx6310 - Notebook PC Specifications

General

Graphics	Intel Graphics Media Accelerator 950
Networking	10/100/1000 Gigabit Ethernet
Memory	512 MB DDR2 SDRAM
Display	15.0" XGA (1024 x 768) TFT LCD
Optical Drive	DVD-ROM
Operating System	Windows XP Professional
Battery	6-cell Lithium Ion
Chipset	Intel 945GM
Wireless	802.11a/b/g
Ports	VGA, headphone, microphone, RJ-45, RJ-11
Storage	60 GB HDD