HP Officejet 150 - 1 Get started

11
English
Connect the printer using Bluetooth
Set Bluetooth security for the printer
You can enable the following printer security settings from the printer’s control panel:
• RequirepasskeyauthenticationpriortosomeoneprintingtotheprinterfromaBluetoothdevice.
• MaketheprintervisibleorinvisibletoBluetoothdevicesthatarewithinrange.
Tip: To enable these settings, you can use Toolbox (Windows), HP Utility (Mac OS X), or the Toolbox
software for PDAs (Windows Mobile). For more information, see the user guide.
Use a passkey to authenticate Bluetooth devices
You can set the security level of the printer to either High or Low.
• Low: The printer does not require a passkey. Any Bluetooth device within range can print to it.
Note: The default security setting is Low. Low level security does not require authentication.
• High: The printer requires a passkey from the Bluetooth device before allowing the device to send a print job
to it.
Note: Theprintershipswithapredenedpasskeythatissettosixzeroes“000000”.
Set the printer to be visible or not visible to Bluetooth devices
You can set the printer to be either visible to Bluetooth devices (public) or not visible to any (private).
• Visible: Any Bluetooth device within range can print to the printer.
• Not visible: Only Bluetooth devices that have stored the device address of the printer can print to it.
Note: The printer ships with a default accessibility level of Visible.
Reset to factory default settings
Note: Using the following instructions will reset only the printer’s Bluetooth settings.
1
Touch right arrow
, and then touch Bluetooth on the control panel.
2 Touch Settings, and then touch Reset Bluetooth.