EasyManua.ls Logo

HP OMEN TRANSCEND 32 - Locating the Serial Number and Product Number; Setting up the Monitor; Attaching the Monitor Stand

HP OMEN TRANSCEND 32
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Table 2-2 Rear components and their descriptions (continued)
Compo
nent
Component Description Description
(12) Audio-out (headphone) jack Connects optional powered stereo speakers, headphones, earbuds, or a television
audio cable
CAUTION: To reduce the risk of personal injury, adjust the volume before using
headphones or earbuds.
(13) Headphone hook Stores the headphones onto the top-left corner of the monitor.
Locating the serial number and product number
The serial number and product number are located on a label on the rear of the monitor. You might need
these numbers when you contact HP for support.
Setting up the monitor
This section describes attaching a monitor stand or wall mount and the options for connecting your
monitor to a PC, notebook, gaming console, or similar device.
WARNING! To reduce the risk of serious injury, read the
Safety & Comfort Guide
. It describes proper
workstation setup and proper posture, health, and work habits for computer users. The
Safety &
Comfort Guide
also provides important electrical and mechanical safety information. The
Safety &
Comfort Guide
is available on the web at http://www.hp.com/ergo.
IMPORTANT: To prevent damage to the monitor, do not touch the surface of the OLED panel. Pressure
on the panel can cause nonuniformity of color or disorientation of the liquid crystals. If this occurs, the
screen will not recover to its normal condition.
IMPORTANT: To prevent the screen from getting scratched, defaced, or broken and to prevent
damage to the control buttons, position the monitor facedown on a flat surface covered with protective
sheet foam or a nonabrasive cloth.
Attaching the monitor stand
Correctly attaching your monitor stand is critical for safe use. This section describes how to safely
attach a stand.
TIP: Consider the placement of the monitor, because surrounding light and bright surfaces might
cause interfering reflections.
NOTE: The procedures for attaching a monitor stand might be different on other models.
NOTE: Leave the monitor in the box to protect the screen.
1. Open the box so that the monitor head is facedown in the box.
Locating the serial number and product number
7

Table of Contents

Related product manuals