4. Use the USB or USB Type-C ports (downstream) on the rear of the monitor to connect devices such
as the ones shown in the illustration.
NOTE: To enable the USB ports and USB Type-C port (downstream), connect the USB Type-C
cable or the USB Type-C-to-USB Type-A cable from the source device to the USB Type-C (upstream)
port at the rear of the monitor. This connection serves as a USB hub for a mouse, keyboards,
phones, external hard drives, and anything else that is connected via a USB port.
Adjusting the monitor
To support an ergonomic work space, your monitor offers the adjustment options outlined in this
section.
WARNING! To reduce the risk of serious injury, read the
Safety & Comfort Guide
. It describes proper
workstation setup and proper posture, health, and work habits for computer users. The
Safety &
Comfort Guide
also provides important electrical and mechanical safety information. The
Safety &
Comfort Guide
is available on the web at http://www.hp.com/ergo.
12
Chapter 2 Getting started
To Next Page
Loading...
