HP OMEN TRANSCEND 32 - OMEN Gear Switch; Connect the Cables

Table 3-3 OSD menu options and descriptions for Gaming main menu (continued)
Gaming main menu Description
System ● Select and adjust the Language, Information, OSD menu transparency, Menu Timeout, and OSD
Message.
● Adjust the Display Data Channel/Command Interface (DDC/CI), Monitor DSC Support,
Diagnostic Patterns, OLED Protection settings, and allows you to return all OSD menu settings
to the factory default settings.
● Displays information about current mode, optimal mode, color setting, display mode, firmware
package version, hardware revision, and serial number.
Table 3-4 OSD menu options and descriptions for Professional main menu
Professional main menu Description
Picture Adjust the screen image, including color preset, brightness, sharpness, video level, and image
scaling.
Input Select a viewing mode, current input signal (DisplayPort, HDMI, USB Type-C) Auto-Switch Input,
OMEN Gear Switch, DisplayPort Hot-Plug Detection, DisplayPort Mode, USB-C Configuration, HDMI
CEC, Rename Inputs, and Help.
Audio Enable or disable audio, select an audio mode, adjust the volume, or perform an internal speaker
self-test.
Power Select a power mode, auto-sleep mode setting, power-on recall setting, or power LED setting.
System ● Select and adjust the Language, Information, OSD menu transparency, Menu Timeout, and OSD
Message.
● Adjust the Display Data Channel/Command Interface (DDC/CI), Accessibility, Monitor DSC
Support, Diagnostic Patterns, OLED Protection settings, and allows you to return all OSD menu
settings to the factory default settings.
● Displays information about current mode, optimal mode, color setting, display mode, firmware
package version, hardware revision, and serial number.
OMEN Gear Switch
Use OMEN Gear Switch to independently control your accessories or peripherals across devices. This
feature also allows you to move files and data from one host computer to the other without a USB
device.
Connect the cables
For best results, HP recommends connecting both host computers to the monitor using the USB Type-C
connections.
If there is no USB Type-C connection available, you can use HDMI or DisplayPort connections for the
video input, and connect an additional USB Type-C-to-USB Type-A data cable to enable full functionality.
NOTE: When connecting using HDMI or DisplayPort connections, the USB hub is enabled only if the
monitor is also connected to the computer using a USB Type-C cable, or USB Type-C-to-USB Type-A
cable.
OMEN Gear Switch
21