If you are adding an optional speaker bar to the monitor, install it after pivoting the monitor. The
speaker bar will come in contact with the base when the monitor pivots and potentially cause
damage to the monitor or speaker bar.
● Adjust the monitor to full height position and tilt the monitor back to full tilt position (1).
● Pivot the monitor clockwise or counterclockwise 90° from landscape to portrait orientation (2).
NOTE: Use the operating system's display settings to rotate the image on the screen from
landscape to portrait. To rotate the OSD from landscape to portrait, open the OSD menu, select
Image Adjustment, select On-Screen Menu Rotation, and then select Portrait.
Turning on the monitor
This section provides important information about preventing damage to your monitor, startup
indicators, and troubleshooting information.
IMPORTANT: Burn-in image damage might occur on monitors that display the same static image on
the screen for 16 or more hours. To avoid burn-in image damage, always activate a screen saver
application or turn off the monitor when it is not in use for a prolonged period of time. Image retention is
a condition that might occur on all OLED screens.
14
Chapter 2 Getting started
To Next Page
Loading...
