3. To attach the monitor head to a swing arm or other mounting device, and then insert four mounting
screws through the holes on the mounting device into the VESA screw holes on the back of the
monitor head.
IMPORTANT: If these instructions do not apply to your device, follow the mounting device
manufacturer’s instructions when mounting the monitor to a wall or swing arm.
NOTE: If you are attaching the monitor to a wall or other flat surface, HP recommends that you
purchase a wall mount kit with the dimensions shown here.
Connecting the cables
In addition to details about how to connect a cable, this section contains information about how your
monitor functions when you connect certain cables.
NOTE: This monitor is capable of supporting USB Type-C, HDMI, or DisplayPort inputs. The video
mode is determined by the video cable used.
1. Place the monitor in a convenient, well-ventilated location near the computer.
2. Connect the power connector to the AC adapter (1), connect the end of the power cord to the power
connector (2) on the monitor, and then plug the power cord into a grounded AC outlet (3).
WARNING! To reduce the risk of electric shock or damage to the equipment:
● Do not disable the power cord grounding plug. The grounding plug is an important safety
feature.
10
Chapter 2 Getting started
To Next Page
Loading...
