Configuration and Setup
Main Configuration Screen
Pressing [fn][f2] invokes the BIOS setup and configuration utility. The screens shown in this section of the familiarization guide are from the
OmniBook 5000. The OmniBook 5500 is the same except in the few cases noted in the text.
Users can check system configuration and change settings using [f] keys from this screen. This is the most accurate place to check battery
and system status. Pressing [f3] from this screen exits back to the current application. The setup/configuration utility is operating system
independent. The main screen also displays the BIOS revision in the upper bar.
31
To Next Page
Loading...
