Power Configuration
To implement the power management capabilities, the following settings are set by the user from the power setup screen.
CPU clock rate will be
reduce if the system has
been idle for the selected
delay. The clock rate will
be restored when system
activity is detected.
2 sec512ms-8secondsCPU power-down
HDD will turn off, system
has ability to run. HDD will
spin up when access
required.
3 minutesDisable/Time
(1-30 minutes or never)
HDD power-down
How long the system will be
in off before the entire state
of the computer the
suspend state. If disabled
it will stay in the suspend
state.
1 dayDisable/Time
(6 hours to 7 days or never)
Auto Save-to-disk
How long the system will
stay in Run with (no
activity). If disabled it will
stay in Run.
3 minutes Disable/Time
(1 - 30 minutes or never)
Turn OFF
Enables power saving
techniques.
OnOff/OnPower Saving
Comments:Default:Parameters:Setting:
33
To Next Page
Loading...
Need help?
General