- 26 -
Caution!
Risk of burns through hot residual adhesive.
holding it at the cooled end.
The paper is discharged on the output side (front) with the residual adhesive stuck to it.
4 Repeat the process until no further residual adhesive is on the paper.
5
Î The transport rollers of the laminator have been cleaned.
Model
Dimensions [mm]
Power supply
Laminating speed [mm/min]
Max. laminating width [mm]
Max. pouch thickness [mic]
No. of transport rollers
Warm-up phase [min]
Weight [kg]
Automatic shutdown [min]
OneLam
400
A4
380×123×81
220-
240V~,
50/60Hz,
1.74A,
400W
400
230
75-
125
2 25
120-
150
2-4
1.35
30
OneLam
400
A3
460×140×86 330 1.77
To Next Page
Loading...
