Stand
Description Spare part number
Stand 665477-001
The stand is secured with four screws. Remove the screws from the inside of the rear cover to
remove the stand.
To remove the stand:
1. Prepare the computer for disassembly (see
Preparing to Disassemble the Computer
on page 33).
2. Remove the rear cover (see
Rear Cover on page 34).
3. From the inside of the rear cover, remove the four screws that secure the stand in the order
indicated.
Figure 7-3 Removing the stand screws
4. Lift the stand from the rear cover.
To replace the stand, reverse the removal procedures.
36 Chapter 7 Removal and Replacement Procedures All-in One (AIO) Chassis
To Next Page
Loading...
