SSD
Description Spare part number
SSD
128 GB M2 SATA-3 918353-001
256 GB Turbo Drive G2 TLC 918354-001
256 GB SATA-3 SED OPAL2 TLC 918356-001
360 GB PCIe TLC 918357-001
512 GB PCIe TLC 918358-001
IMPORTANT: Make special note of each screw size and location during removal and replacement.
Before removing the SSD, follow these steps:
1. Turn o the computer. If you are unsure whether the computer is o or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the following components:
a. Keyboard (select products only) (see Keyboard (select products only) on page 31)
b. Micro SIM card tray (see Micro SIM card tray on page 32)
c. MicroSD card tray (see MicroSD memory card tray on page 33)
d. Rear cover (see Rear cover on page 34)
e. Disconnect the battery (see Disconnecting the battery on page 35)
Remove the SSD:
1. Remove 1 Phillips M2.0x2.0 screw (1).
38 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts
To Next Page
Loading...
