To Next Page

To Previous Page

1-1

Switch Overview

Switch Hardware Features

The HP ProCurve 1810G-24 Switch (J9450A) is a multiport switch that can be

used to build high-performance switched workgroup networks. This switch

is a store-and-forward device that offers low latency for high-speed

networking.

Switch Ports

The switch has 24 auto-sensing 10/100/1000Base-T RJ-45 ports. Two of these

ports are dual-personality (ports 23 and 24). Because the RJ-45 ports support

automatic MDI/MDI-X operation, you can use straight-through cables for all

network connections to PCs or servers, or to other switches or hubs.

Dual-personality ports use either the 10/100/1000Base-T RJ-45 connector, or a

supported ProCurve mini-GBIC for fiber-optic connections. By default, the RJ-

45 connectors are enabled.

This switch is designed to be used primarily as a high-density wiring closet or

desktop switch. With this switch you can directly connect computers, printers,

and servers to provide dedicated bandwidth to those devices, and you can

build a switched network infrastructure by connecting the switch to hubs,

other switches, or routers. In addition, the switch offers network management

capabilities.

HP ProCurve 1810G-24 Switch

Port Link and Mode

LEDs

LED Mode Select button

and indicator LEDs

10/100/1000Base-T

RJ-45 ports

Dual-personality ports

(10/100/1000Base-T or

mini-GBIC)

Power and Fault

LEDs

Other manuals for HP ProCurve 1810G-24

Questions and Answers:

Need help?

Do you have a question about the HP ProCurve 1810G-24 and is the answer not in the manual?

General