Web and MAC Authentication for the Series 2600/2600-PWR and 2800 Switches
Configuring Web Authentication on the Switch
Note Client web browsers may not use a proxy server to access the network.
Configure the Switch for Web-Based Authentication
Command Page
Configuration Level
aaa port-access web-based dhcp-addr 3-18
aaa port-access web-based dhcp-lease 3-19
[no] aaa port-access web-based [e] < port-list > 3-19
[auth-vid] 3-19
[client-limit] 3-19
[client-moves] 3-20
[logoff-period] 3-20
[max-requests] 3-20
[max-retries] 3-20
[quiet-period] 3-21
[reauth-period] 3-21
[reauthenticate] 3-21
[redirect-url 3-21
[server-timeout] 3-21
[ssl-login] 3-22
[unauth-vid] 3-22
Syntax: aaa port-access web-based dhcp-addr <ip-address/mask>
Specifies the base address/mask for the temporary IP
pool used by DHCP. The base address can be any valid
ip address (not a multicast address). Valid mask range
value is <255.255.240.0 - 255.255.255.0>.
(Default: 192.168.0.0/255.255.255.0)
3-18
To Next Page
Loading...
