HP ProCurve 2810 Series Access Security Guide

7-12
Configuring Secure Socket Layer (SSL)
General Operating Rules and Notes
Note “Zeroizing” the switch’s server host certificate or key automatically disables
SSL (sets web-management ssl to No). Thus, if you zeroize the server host
certificate or key and then generate a new key and server certificate, you must
also re-enable SSL with the web-management ssl command before the switch
can resume SSL operation.
CLI Command to view host certificates.
To view the current host certificate from the CLI you use the show crypto
host-cert command.
For example, to display the new server host certificate:
Figure 7-4. Example of show crypto host-cert command
Syntax: show crypto host-cert
Displays switch’s host certificate
Show host certificate command

HP ProCurve 2810 Series Specifications

General

Jumbo Frame Support	Yes
Model	HP ProCurve 2810 Series
Ports	24 or 48 10/100/1000 ports
Uplink Ports	4 SFP (mini-GBIC) slots
Forwarding Rate	71.4 Mpps
Layer	Layer 2
Management	Web, SNMP, CLI
MAC Address Table Size	16000 entries
Routing Protocol	Static IP routing
Form Factor	Rack-mountable
Power Consumption	48W (24-port)
Operating Temperature	32°F to 0°F (0°C to 0°C)
Operating Humidity	15% to 95% non-condensing
Power Supply	Internal power supply